SKULLPANDA x HAMCUS 1/6 Movable Figures

Product Information: 
 Name: skullpanda × hamcus 1/6 action figure
 Brand: POP MART
 Product size: about 24.5cm high (including helmet)
 Executive standard: T/CPQS C010-2024, T/CPQS C011-2023
 Material: pvc/abs/pa/pom/nylon/polyester/hardware/cotton
 * Product size due to different measurement methods measurement results have 0.5 to 1cm error is normal.
 * Product color under the influence of lighting, monitor screen, camera and other factors, the picture will be slightly different from the real thing, the picture, the size is for reference only, the specific to prevail in kind.

This product contains the following items:

 1.Plain body*1pc (with helmet)
 2.Bustier*1pc
 3. Pants*1pc
 4.Gloves*1pc
 5.leggings*1pc
 6.Clip A*1pc 
 7.Sleeve cover *1pc
 8.Poncho*1pc
 9.Shoes*1 pair
 10. Accessory hand * 2

Illustration of the dimensions of the basic body:

 A. Overall (including helmet): 24.5cm
 B. Head circumference (excluding hair): 15.7cm
 C. Helmet width: 10.7cm
 D. Height: 22.5cm
 E. Neck: 2.8cm
 F. Bust: 7.5cm
 G. Waist: 5.1cm
 H. Hip circumference: 10.8cm
 1. Thigh circumference: 6.2cm
 J. Ankle circumference: 6.1cm
 K. Arm length: 5.7cm
 L. Upper arm: 2.7cm
 M.Small arm: 3cm
 N.Leg Card: 11cm
 O.Wrist card: 2.2cm

 *Measurement may have a slight difference
 *The hairstyle in the picture is only a schematic effect, the actual product hairstyle please product in kind shall prevail.

 function introduction
 Eyeballs can be rotated
 Double-jointed elbows
 Wrist can be rotated 360°, palm can be detached and replaced
 Hair detachable
 Waist can be rotated and detached 360°
 Thighs can be rotated and detached 360°.

Head can be rotated and disassembled 360°.
 Helmet/mask removable
 Shoulders can be rotated and detached 360°
 Knee joints are double joints

 *Specific product details can be found in the actual product
 *The hairstyle in the picture is only a schematic effect, the actual product hairstyle please product in kind shall prevail.

Installation Instructions
 Head mounting instructions
 1. Assemble the hair on the head.
 2. Align the head holes, rotate the A-piece into the holes and tighten.
 (* can be inserted in the B piece of A piece of auxiliary rotation)
 3. After the installation of head snap A piece, you can directly install the body into the head hole to complete the installation.
 *The hairstyle in the picture is only a schematic effect, the actual product hairstyle please product in kind shall prevail.

Helmet Installation Instructions
 1. Align the helmet clips and assemble the head with the helmet.
 2. Align the helmet holes, rotate the B-piece into the holes and tighten (* can be inserted into the A-piece on the B-piece to assist in the rotation)
 3. After the installation of the helmet buckle B piece, you can directly install the body into the helmet hole position, complete the installation
 4. Buckle the mask, complete the installation

 * The hairstyle in the picture is only a schematic effect, the actual product hairstyle please product in kind shall prevail.

⚠️Attention
 - The hairstyle in the picture is only a schematic effect, the actual product hairstyle please refer to the actual product.
 - Do not disassemble the head and helmet frequently to prevent wear and tear or rubbing color.
 - In order to avoid makeup wear and tear rubbing color, there is a certain gap between the hair and head, which is a normal range.
 - In order to avoid accessories, clothes for a long time in contact with the vegetal body appears to stain each other; Please do a good job of isolation protection when you play, play after a good separation in time to avoid contamination.
 - Pay attention to dust, in order to avoid clothing deformation and damage, please do not wash; such as dirt can be soft clean cloth to wipe the surface stains.
 - Product packaging contains important information must be retained.

The body has an ore texture effect with a stone lacquer finish, overlaid with blue pearlized lacquer and smudging.

Heteropupil high flash effect, the inner part of the eye is laser flash paper process

Ultra Short Flocked Hairstyles

Earballs are rubberized
 Clothing heavy design, fine accessories, water-dyed old effect
 *Due to the special nature of the plastic wrapping process, there may be water lines and bubbles, which is normal.

Helmet with stone lacquer and smudged finish
 Shoes with stone lacquer and smudged finish